Graphic version of this page | Change how these pages look
Print Strength Bandwidth | www.psb-info.net
IARU Region 3 recommendation
Date: 08 September 2010
This is a printable version of www.psb-info.net/iaru-region-3-recommendation.html
IARU Region 3 recommendation
August 2006: IARU Region 3 adopts RSQ signal reporting
The IARU Region 3 conference in Bangalore has also adopted the RSQ signal reporting table for the HF digital modes. The proposal was put by the Wireless Institute of Australia (WIA) and the meeting resolved as follows:
13th IARU Region 3 Conference, Bangalore 2006
Report to Plenary Meeting from Working Group 2
Operational and Technical Matters
Document 032 Report on RSQ reporting for digital modes below 30 MHz by WIA
The committee took it as recommendation. Addition of "wherever applicable" above 30 MHz was suggested. ARRL supported the recommendation.
Recommendation WG2-5:
It is recommended that RSQ reporting be used for digital modes below 30 MHz.
The
- complete Working Group 2 minutes
- proposal paper submitted by the Wireless Institute of Australia
can be viewed by downloading the articles from the links below.
Downloads
IARU R3 adoption of RSQ reporting (0.06 MB)
WIA RSQ Paper to IARU R3 meeting Aug 06 (0.04 MB)